|
The Athabasca oil sands (also called the Athabasca tar sands or Alberta tar sands) are large deposits of bitumen or extremely heavy crude oil, located in northeastern Alberta, Canada – roughly centred on the boomtown of Fort McMurray. These oil sands, hosted primarily in the McMurray Formation, consist of a mixture of crude bitumen (a semi-solid rock-like form of crude oil), silica sand, clay minerals, and water. The Athabasca deposit is the largest known reservoir of crude bitumen in the world and the largest of three major oil sands deposits in Alberta, along with the nearby Peace River and Cold Lake deposits (the latter stretching into Saskatchewan).〔Mather, Clive , ''Canada Broadcasting Corporation''.〕 Together, these oil sand deposits lie under of boreal forest and muskeg (peat bogs) and contain about of bitumen in-place, comparable in magnitude to the world's total proven reserves of conventional petroleum. The International Energy Agency (IEA) lists the economically recoverable reserves, at 2006 prices and modern unconventional oil production technology, to be , or about 10% of these deposits.〔 These contribute to Canada's total proven reserves being the third largest in the world, after Saudi Arabia and Venezuela's Orinoco Belt. By 2009, the two extraction methods used were ''in situ'' extraction, when the bitumen occurs deeper within the ground, (which will account for 80 percent of oil sands development) and surface or open-pit mining, when the bitumen is closer to the surface. Only 20 percent of bitumen can be extracted using open pit mining methods,〔(【引用サイトリンク】title=Steam-Assisted Gravity Drainage (SAGD) )On this site is a Cenovus animation on how SAGD works.〕 which involves large scale excavation of the land with huge hydraulic power shovels and 400-ton heavy hauler trucks. Surface mining leaves toxic tailings ponds. In contrast, ''in situ'' uses more specialized techniques such as steam-assisted gravity drainage (SAGD). "Eighty per cent of the oil sands will be developed ''in situ'' which accounts for 97.5 per cent of the total surface area of the oil sands region in Alberta."〔(【引用サイトリンク】publisher=CAPP )〕 In 2006 the Athabasca deposit was the only large oil sands reservoir in the world which was suitable for large-scale surface mining, although most of this reservoir can only be produced using more recently developed in-situ technology.〔 Critics contend that government and industry measures taken to reduce environmental and health risks posed by large-scale mining operations are inadequate, causing unacceptable damage to the natural environment and human welfare.〔 〕 Objective discussion of the environmental impacts has often been clouded by polarized arguments from industry and from advocacy groups.〔 〕〔 〕〔 (industry publication)〕 == History == The Athabasca oil sands are named after the Athabasca River which cuts through the heart of the deposit, and traces of the heavy oil are readily observed on the river banks. Historically, the bitumen was used by the indigenous Cree and Dene Aboriginal peoples to waterproof their canoes.〔Mackenzie, Sir Alexander (1970). "The Journals and Letters of Alexander Mackenzie". Edited by W. Kaye Lamb. Cambridge: Hakluyt Society, p. 129, ISBN 0-521-01034-9.〕 The oil deposits are located within the boundaries of Treaty 8, and several First Nations of the area are involved with the sands. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Athabasca oil sands」の詳細全文を読む スポンサード リンク
|